5 Ply Corrugated Production Line for Sale

• Customization: Available
• Usage: Packaging of Goods, Produce Packing Belt
• Packaging Material: Paper
• Driven Type: Electric
• Type: Packaging Production Line
• Function: Transport Packaging, Storage and Packaging, Sales Packing
• Soft and Hardness: Flexible Package
• Circulation Function: Outer Packing
• Frequency of Use: Packing
• Mode of Operation: Domestic Product Packaging
• Name: 5 Ply Corrugated Production Line for Sale
• Keyword: 5 Ply Corrugated Production Line
• Transport Package: Carton Box
• HS Code: 8439200000
• Production Capacity: 60000m/Day

Product Description

WJ100-1800
1800-3 LAYER CORRUGATOR LINE

(:100m/min ;:80m/min)
(Design Speed :100m/min  Working Speed: 80m/min)






 

WJ100-1800 Type 3 LAYER CORRUGATOR LINE
 

Item	Name	QTY	Feature
MB-I	Electric Reel Stand ( with 2 pcs of Manual Trolly with track)	3	Toothed chuck,manual discbrakes,pneumatic mechanically actuated lift,panning left and right on the middle Guide rail length is 4500 mm, the car uses 10 mm plate welding
SP	Pre-heater Ø 600mm	2	The roller ¢600 mm; electric adjustment angle; angle can be adjusted within the range of 360 °
280CR	Single Facer	1	Corrugated diameter is 280mm, 48CrMo high quality alloy steel; Adopt independent gearbox, universal joint drive structure
SP	Duplex Pre-heater Ø 600mm	1	The roller ¢600 mm, including the pressure vessel certificate; electric adjustment angle; angle can be adjusted within the range of 360 °
CGM-F	Gluer Machine	1	Glue roller dia. 269mm,carved 25 line pit type checker; each layer independent variable frequency motor drive
OHB	Conveying Bridge	1	Main frame is 200mm box iron,independent frequency conversion motor drive paper transport, adsorption tension. Electric correction. 200mm,,..
HPM	Double Facer	1	Hot plate 600 mm * 9pcs; press rollers lift by pneumatic,compressed press rollers structure 600 mm *9;,
FTKM	Slitter Scorer	1	Blade adjust by manual, 4 blade 6 line, adopt tungsten carbide knive ,46,.
NC-H	NC Cut-Off	1	Full AC servo control, helical knife structure, touch screen display. ,,.
SMA	Carton Sheet Stacker	1	Electrical adjust the size of cardboard, cardboard  transverse output controlled by pneumatic ,.
ZJZ	Glue Making Station System	1	Customer-owned pipeline. .
ZQ	Internal Steam system	1	Steam system components adopt GB valve; Contains rotary joint, up and down distributor , drain valve,steam trap and pressure gauge, etc.; Boiler and piping supply by customer ;,,,;.
	EXW PRICE: USD 168076

MAIN SPECIFICATION


MODEL: WJ100-1800 3 LAYER CORRUGATOR LINE
WJ100-1800
1. Manufacture width: 1800mm

2. Design speed: 100m/min   Working speed:80m/min

3. Note: The roll paper which is used to test the production speed should meet following requirements:

*Grade: Min. B                        * Moisture content: 11% ± 2%

*Face paper: 100~250g/m2             * Liner paper: 100~150g/m2

* Corrugated paper: 100- 200g/m2
 
4. Flute profiles: A,B,C ,E flute(as per clients request)

5. Steam requirements
:
Steam consumption:2500kg/h     Air compressor pressure:0.8~1.1Mpa

6. Electricity: 380V, 50Hz,three-phase four wire type
:     
7. Equipment Direction:Left or Right transmission will be according to client's requirements.
:
8. Factory request size:specific length as to the foundation of drawing


Buyer supply part

1. Air compressor , air pipe line and glue pipeline.

 

1. Main power, electric wire from operate box to main power.

 

1. Water supply, pipeline and barrel.

 

1. Water, electric and gas, main ground foundation.

  

1. Test machine use Raw materials ( paper roll, corn starch, caustic soda, sodium borax) to test machinery.

    

1. Machine use oil, lubricate oil and high temperature lubricate oil.

 

1. Installing engineer's food, hotel and supply enough workers to help installing and test machine.

    

1. Boiler 2T supply by customer and the pressure 1.25Mpa and the working pressure is 0.8~1.1Mpa.

 
 
MB-I
Electric Reel Stand



Structure and Features:
:
1.Symmetrical structure,can carry two kraft paper at one time,which can work without brake.
,
2.Reel paper lift-lower, clamp, loosen, movement, contraposition operated by electric mechanic.feeding kraft / reel paper quickly.
,,,,.
  
Spec of stand:
:
1. Reel Stand driven by electric
:
2. Kraft paper range:
:
Max. Width:1800mm      Min.:900mmmm

Max Weight:2000Kg(One side)

Spec of electric motor:
:
1. Reel Paper Nipping Motor Power: 500W*4pcs   
    
Nominal voltage:380V  50Hz  Short Time(S2) Working Type

Lifting Motor Woking Power: 1.5KW

Nominal voltage:380V  50Hz  Short Time(S2) Working Type  


Kraft paper feeding ground rack & trolly
,




Structure and Features:

1. To feed the kraft paper to reel stand.

2. The whole body of rack is under the ground, main frame: Model 14 channel steel with ¢ 20mm drawing bar weld together,overall length 4500mm.

3. Two racks for one reel stand to feed the kraft paper at both side.


Preheater Ø 600mm 



Structure and Features:

1. The preheater roller is under the stander of the 1st class(grade) pressure vessel of the national.,.
2. All the surfaces of every rollers have been grinded with high accuracy and chromed plated to less the resistance of paper preheating, long service of using life.

3. Electric to enlarge the preheating area, preheating area can be in 360° to adjust the preheating
Area

.
Common Spec:

1. Working Width: 1800mm  

2. Diameter of the Preheater cylinder:Φ600mm   Diameter of the roller for Preheating :Φ85mm

3. Steam temperature: 150-200ºC      Steam pressure: 0.8-1.3Mpa

4. Working Power: 380V     50Hz  

5. Power:250W     Short Time(S2) Working Type



280CR
280CR Single Facer


Structure and Features:
:
Corrugated Rollers:
:

Diameter	Down Roller:Φ280mm
Material	48CrMo high quality alloy steel, rigidity HRC55°-58°
Processing Way	The surface of upper-lower roller is plating chrome, annealing, hardening and tempering, surface grinded ,
Fulte Type	(U/V) ACBEF
Heating way of the reel paper	Steam heating

Press Rollers:

Diameter	Φ284mm
Material	medium steel (MS)45#
Processing Way	The surface is grinded then plating chrome, hardening and tempering(With Buffer)
Control Way	Cylinder control of the Lifting Up-down

Glue Rollers:
:

Diameter	Φ215mm
Processing Way	Surface of glue roller is grinded, then with 25 line rut type net dot,then plating chrome Surface of glue banlance roller is grinded then plating chrome
Control Way	Cylinder control of the Lifting Up-down
Glue Supply	Glue circulating system(storage tank+glue pump)

Preheater Rollers:
:

Diameter	UP Roller:Φ320mm
Material	seamless steel tube
Material band or origin	Tianjin Iron & Steel
All connected by flexible metallic tubes

Common Spec:

Style of Transmit cardboard	Vacuum Cover adsorbable style, Hight pressure Draw fan.with wind control Adjusting & noise deadening device. ,,
Style of Control Roller	Pneumatic control the upper roller, pressure roller and glue roller ,
Driving Way:With frequency inverter :

Common Spec:

1. Working width: 1800mm 

 

1. Design Speed:100m/min  Working Speed: 80m/min

 

1. Temperature: 180-200ºC   

 

1. Air pressure: 0.8-1.3Mpa

Spec of Motor:

1. Main Motor: 7.5kw  

    

1. Nominal voltage:380V 50Hz Continuous (S1) working Type

CGM-F
CGM-F Gluer




Structure and Features:
 

1. After the glue roller surface quenched, bore machining, surface grinding and doing balancing engraved pit style textured, coating evenly, consume less glue.

 

1. Glue roller rotation frequency motor control, the inverter control ensures glue line speed and duplex roller synchronous machines, and can operate independently.

 

1. Electric adjustment digital glue. Automatic cycle for glue, glue avoid sedimentation and viscosity stability.

 

1. Pneumatic presses structure, trimming the gap by the electric.
2. Sided machine speed signal measurements taken in order to achieve its synchronous operation. Man-machine interface display, easy operation.

Common Spec:

1. Preheater cylinder temperature range: 150-180ºC     Steam pressure: 0.8-1.2Mpa

2. Pneumatic system: 0.4-0.7Mpa

Spec of the rollers' diameter:
:
1. Glue roller:Φ269mm              Glue amount adjusting roller:Φ140mm

2. Down preheater roller:Φ402mm     Up preheater roller: Φ374mm    Paper roller:Φ86mm


Spec of Motor:

1. Glue rollers frequency variable motor: 3KW
            
  Nominal voltage: 380V 50Hz Continuous (S1) working Type

2. Glue quantity adjustment motor:250W

  Nominal voltage:380V 50Hz Short time (S2) working Type

3. Glue pump motor: 2.2KW
                        
  Nominal voltage: 380V 50Hz Continuous (S1) working Type


OHB
OHB Conveying Bridge



Structure and Features:

1. The Main Frame is connected with channel steel, and angle steel.

2. With Protecting Handrail on both sides and safety pedal, the operation side is installed with safety ladder, to make sure the safety and convenience of the worker.

3. Vacuum suction tension control, suction pipe with adjusting valve,draw fan power can be adjusted freely.

4. Correct the position by double guide posts , correct parts are driven by screw , fast and accuracy to position, steady to move.

Spec of the rollers:
:
1. Paper feeding rollers & tension rollers:Φ127mm      transport rollers:Φ110mm

2. Main tension drive rollers:Φ127mm       paper pass rollers and paper guide rollers:Φ110mm

3. Paper feeding rollers with belts:Φ110mm  

Spec of Motor:

1. Single face sheet draw motor: 3kw,   380V 50Hz Continuous (S1) working Type

2. Draw Fan Motor: 3kw,               380V 50Hz Continuous (S1) working Type

3. Paper width adjusting speed reducer: 250w     380V 50Hz Short time (S2) working Type


HPM
HPM Double Facer

Structure and Features:
:
1. Hot Plates' surfaces is grinded and then chromed plated,width:600mm.total 9 pieces of hot   plates

   Hot plates are made by container plates, can pass the national first level pressure container standars

2. Hot plates adopts the compressed press rollers structure.Pressure roller lifting adopt pneumatic structure

3. Up convey belt left and right correct by auto with both sides, tension adjusting system; down belt manual small amount adjust.

4. Drive rollers' surface is wrapped by rubber, Y shape structure,with middle height,to make sure the board can be out smoothly

5. Main drive motor: Variable frequency motor, high force when low speed start, high speed adjusting range, steady to use,easy to mend.

6. Hot Plates' heat pipe piecewise control temperature.

7. Up belt adopt double cylinder S type  tensioning device

8. Under belt adopt S type manual correct tensioning device.

Common Spec:

1. Temperature requirement: 160-200ºC        Steam Pressure :0.8-1.3Mpa

2. Air pressure:0.6-0.9Mpa

3. Cool shaping length: 4m          Heating plates amount: 9 pieces

Spec of the rollers' diameter:

	Roller	Spec
1	Up drive roller	Φ400mm (Wrapped by anti-grinded rubber)
2	Down drive roller	Φ400mm (Wrapped by anti-grinded rubber)
3	Front driven belt roller	Φ320mm
4	Back Shaping Driven belt roller	Φ186mm
5	Belt Press roller	Φ70mm
6	Shaping Holder Roller	Φ86mm
7	Up Belt Tension roller	Φ127mm
8	Up belt correcting roller	Φ130mm
9	Down Belt Tension roller	Φ127mm
10	Down Belt Holder Roller	Φ130mm

Note: All the surfaces of the rollers are grinded and then chromed plated.
:.
Spec of Motor:

Main Drive Motor: 22kw Frequency
      
Nominal voltage: 380V 50Hz Continuous (S1) working Type.


FTKM Electric Slitter Scorer
FTKM

Structure and Features:

 1. Overcome the phenomenon of collapse the board when crop, smooth cutting, and the quality is improved

 2. The machine can move lift and right, adjust by cycloidal reducer.

 3. Cutter and line pressing adjustment convenient, error is ±0.5 mm, with automatic sharpening device

4. 4blades 6 lines type, blade is made of tungsten alloy steel, life is more than 30,000 m

Technical parameter:

1. Max. width:1800mm                  
2. Specification: 4 knives 6 lines  
3. Min. Cut width:135mm           
4. Max cut width:1850mm         
Motor:

1. Knife motor:0.4KW
            
2. Knife driver motor:5.5KW


NC-S Cut Off Machine
NC-S



Structure and Features:

1. Cutting length:500mm-9999mm.   Cutting precision:±1mm.

2. Knife shaft gear using precision forging steel material high frequency quenching, lateral clearance transmission , adopt the keyless connection mode, high driving accuracy.

3. Helical knife structure,type sawtooth knife,decrease cutting obstruction,low noise.

4. Balance treatment, high quality alloy steel for blade shaft,which helps to keep it good  stability.

5.Sun-shape wheels press cardboard in the front and the rear conveyer.The transporting is stable and with even pressure,which avoid jam caused or broken cardboard.

6. Precision adjustable gap gear, ensure blade precision engagement, running balance.

7. Machine base and wall panel adopt the grey cast iron, good rigidity, strong vibration resistance.

8. The servo controller control the servo motor, Taiwan  Eview 10.4 inch touch screen

Technical parameter:

1. Min. cut length:500mm           2. Max cut length:9999mm

2. Cut precision: uniform velocity ±1mm,    non-uniform velocity ±2mm

 Motor:

1. Main motor:12.5kw      Ac synchronous servo
       
2. Feeder motor:3 kw(Frequency control the speed)

3. Lubricating oil pump motor:0.25kw


Carton Sheet Stacker





Structure & Features:

1. Weld by 14 # channel steel, electric to adjust the size of the board, pneumatic to control the the output on transverse direction, output speed can be adjusted electrically.

2. Corrugated sheet can be controlled output by foot switch when the mount or height of stacking corrugated sheet reaching the needs.
.
3. Longitudinal joint paper adopt wide conveyor belt conveyor.
.        
Common Spec:

1,Max length of stacking:3000mm                        
  2,Max height of stacking: 200mm          
Spec of Motor:

1. Main feeding frequency variable motor: 3KW  Frequency conversion motor
        
2. Transverse direction motor: 1.5KW    Three-phase asynchronous motor
    
3.Traveling motor: 1.5KW      Three-phase asynchronous motor  
    




Glue Making System


1. Supply the glue for the single facers and double glue machine which use glue water

2. The glue in the glue storage tank are transported by the glue pump to the device.

3. The storage tank and glue supply tank are with mix device, to avoid the glue becoming into the sediment.

5 After the work finished, rest glue of each glue using devices are draw to the glue return storage tank to prepare for the next time using.

6. Responsible for technique guidance, and glue making way.

Steam System

Structure & Features:

1. To supply the heating energy for the various heating parts of the line, and keep the working temperature steady.

2. Each groups are deigned to be single steam supply system, temperature control by separately, energy saving and adjust conveniently.

3. Temperature controlled by adjusting the steam pressure, and with pressure gauge.

4. To long the using line of the rotary joints, the pipe system and rotary heating parts are connected by metal flexible pipe to realize the flexible connection

5. All the steam pipes are made of seamless steel pipe, to make sure the safety under the normal pressure.


Common Spec:

1. Suitable boiler: 2t/h

 

1. Suitable boiler pressure:1.25Mpa

     

1. Temperature inside of pipe: 170-200ºC