| Customization: | Available |
|---|---|
| Product Type: | Box |
| Paper Type: | Cardboard |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
name |
Unit |
2000 |
|
Max paper coverage area |
Mm |
950x1800 |
|
Effective printing area |
Mm |
950x1700 |
|
Min finish size |
Mm |
190x580 |
|
Printing plate thickness |
mm |
6.0 |
|
Machinable cardboard thickness |
layer |
2-12 |
|
Max speed |
Pcs/min |
150 |
|
Economy speed |
Pcs/min |
130-150 |
|
Frequency conversion power of main motor |
Kw |
7.5 |
1, machine clutch
(1), the electric control machine is equipped with an alarm bell, and the bell is continuously ringing during the march to ensure
Industry personnel are safe.
(2), pneumatic interlocking device.
(3), the main motor uses variable frequency motor, frequency conversion control, energy saving, stable start, attached to the horse
Start protection device.
2, leading edge roller feeding system
(1), suction auxiliary paper feeding, - according to the bending conditions of the cardboard, the air volume adjustment,
Make sure the paper feed is smooth.
(2), the paper is lifted and the paper is driven by the cylinder, which is quick and labor-saving.
(3) Adopt the leading edge roller feeding system.
(4), the side baffle and the rear baffle position are electrically adjusted; the front baffle gap is manually adjusted.
(5) Separate sheet feeding device (Continuous or sheet feeding can be selected as needed).
(6), paper feed counter, set and display the production quantity.
4, paper feed roller
(1) The outer diameter of the upper roller is φ100 mm.
(2), high-quality seamless steel, wrapped with wear-resistant rubber, and balance correction.
(3), the lower roller φ124mm embossed hard chrome plated, and balance correction.
(4), the paper feed roller clearance dial is manually adjusted, the adjustment range is 0-12mm.
Baffle control; left and right, up and down manual adjustment
Second, the printing department (optional 1-5 color printing group)
1, printing roller (plate roller)
(1) The outer diameter is φ292mm (including the outer diameter of the plate is φ300mm).
(2) The surface of the steel pipe is ground and hard chrome plated.
(3), do balance correction, and run smoothly.
(4) Loading and unloading the printing plate, the electric control of the foot switch is reversed.
2, printing pressure roller
(1) The outer diameter is φ124mm.
(2) The surface of the steel pipe is ground and hard chrome plated.
(3), do balance correction, and run smoothly.
(4) Manual adjustment of the printing roller gap dial, the adjustment range is 0-12 mm.
3, feeding the upper and lower rollers
(1) Upper roll: Thick-walled steel pipe with outer diameter of φ71mm, equipped with four paper feed rings.
(2), lower roll: outer diameter of φ124mm thick-walled steel pipe, surface grinding, hard chrome plating.
(3), the paper feed roller clearance dial is manually adjusted, the adjustment range is 0-12mm.
4, steel anilox roller (optional Dalian or Haili)
(1) The outer diameter is φ156 mm.
(2), the surface of the steel pipe is ground, pressed netting, hard chrome plating.
(3), do balance correction, and run smoothly.
(4) The number of nets is 180, 200, 220, 250, 300.
(5), with the paper feeding system pneumatic automatic lifting device. (The anilox roller drops when feeding
In contact with the plate, the anilox roll rises and the plate is separated when the paper feed is stopped).
(6) The anilox roller is equipped with a wedge type overrunning clutch, which is convenient and quick to disperse ink and wash ink.
6, rubber roller
(1) The outer diameter is φ142 mm.
(2), the surface of the steel pipe is wrapped with wear-resistant rubber, and the balance is corrected.
(3), the rubber is high in special grinding, and the ink transfer effect is good.
7, phase adjustment mechanism
(1) Planetary gear construction.
(2), printing phase electric digital 360 ° adjustment. (can be adjusted both in operation and stop)
(3) Manually adjust the lateral position and adjust the distance to a total of 10mm.
8, ink circulation
(1), pneumatic diaphragm pump, stable ink supply, easy operation and maintenance.
(2), ink filter, filter impurities.
The slotting department
1. Pressure line device
(1) The shaft diameter is φ71 mm and the surface is ground. Hard chrome plated for smooth movement.
(2), do balance correction, and run smoothly.
(3) Manual adjustment of the pressure wheel clearance dial, the adjustment range is 0---12mm.
2, slotted tool holder traverse adjustment mechanism
(1), the shaft diameter is φ124mm, the surface is ground, hard chrome plated, and the movement is stable.
(2) The width of the slotting knife is 5-7mm.
(3), alloy steel material heat-treated grinding toothed slotting knife, hardness and toughness are good.
(4), the alloy steel material is heat-treated and polished, and the edge is sharp and the precision is high.
(5) Adjusting the traverse position of the pressure roller and the slotted cutter seat, and adopt manual mechanical joint adjustment.
(6) Two feeding paper shafts are added in the middle of the slotting and pressing line to ensure the accuracy of slotting and small cardboard
Smooth delivery, greatly avoiding paper waste. 3. Slotted phase adjustment mechanism
(1) Planetary gear construction.
(2), slotted phase electric digital 360 adjustment. (Operation and stop can be adjusted).
4, box height adjustment mechanism
(1) Planetary gear construction.
(2) Single-pole electric digital adjustment.
the stacking department
1, the paper pick arm
(1), optional manual or automatic operation.
(2), the paper arm drive belt, adjust the tightness separately, not limited by the length of the belt.
2, bed lift
(1), strong chain drive.
(2) The stack height is 1600mm.
(3) The bed lift drive motor is equipped with a brake function, and the bed can be kept in a fixed position.
Will not slip.
(4) Install safety protection devices to make the bed lifts under control and ensure the operator Safety.
(5), flat wrinkle climbing belt to prevent the cardboard from sliding.
3, pick up cardboard
(1), air pressure action paper baffle, when the cardboard is stacked to a predetermined height, the paper tray
Extend automatically and hold the cardboard.
(2), the position of the tailgate is manually adjusted.
Transmission gear
1, the main drive gear
(1), the material is: 45 steel, after milling the teeth and then shaving, automatic spray
slip
(2), six-level accuracy, smooth operation, hardness HRC58-62, long life, 10 years to
It is basically not worn inside and can achieve long-term printing registration.
){kind=link}