| Customization: | Available |
|---|---|
| Printing Page: | Single Faced |
| Printing Color: | 4 Colors |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
type |
unit |
YK1224 |
|
Plate roller dia |
mm |
405 |
|
Plate roller length |
mm |
2420 |
|
Inner width of machine |
mm |
2850 |
|
max speed |
Ps/min |
140-160 |
|
economic speed |
Ps/min |
120 |
|
max printing size |
Mm |
1200×2400 |
|
max feeding paper size |
Mm |
1270×2600 |
|
skip feed paper size |
Mm |
1500×2600 |
|
min feeding paper size |
Mm |
320×720 |
|
board thickness |
Mm |
2/3-10mm |
|
machine frame thickness |
Mm |
60mm |
|
topping precision |
Mm |
≤±:0.35 |
|
slotting precision |
Mm |
≤±:1.2 |
|
die cutting precision |
Mm |
≤±:1.5 |
|
main motor power |
KW |
37 |
|
max slotting depth |
Mm |
300 |
|
min slotting distance |
Mm |
120 |
1.This machine is designed and produced based on high qualilty, high speed, high efficiency, reliability and safety, with the advantages of quickly changing order and easy operation.
2.Adapting imported PLC with touch screen control. It can save order, and accelerate the changing order speed.
3.Adopt high quality material and assembly part.
4.All cylinders and rollers are chrome plated for ideal hardness
5.Transmission gears from precision grinded alloy steel and with spraying type circulating lubrication system.
6.Use expansion sets tight link to reduce abrasion of the shaft, keep high precisionof th machine with long time.
7.Adopt hanging structure, auto reset, quick changing order
8.Each unit is equipped with Emergency Stop switch to ensure safety operation.
9.Using Self Locking gap adjustment device for easy operation.
10.Electric element, bearing, and pneumatic element all use international famous brand.
1.Lead edge feeder system, inverter adjust air volume, feeding in precision and steady.
2.Double feeding roller model, quick replacement mechanism for the first feeding rubber roller,
with spring adjustment function, it can prevent distortion and to ensure accurate feeding ofcardboard.
3.Brushes and suction device remove dust from board surface.
4.Touch screen displays production speed and quantity.
5.Adjust the feed interval by manual
1.Both printing cylinder and impression cylinder anre made of high quality steel with grounding surface and
chrome plated. Dynamic and static balance correction ensure to run stability.
2.Adopt hanging structure, convenience and fast to set up.
3.Installing san uninstalling printing plate with pedal swithc or operation panel to control forward and reverse
4.To match with feeding unit the machine with automatic lift anilox, when the feeding unit runs, the anilox roller
goes down to contact with printing plate, while, on contract, leave printing plate
5.Phase position utilizing electromagnetic cluth locking device, with intelligent zeroing function and can reset in
dynamic and static condition.
6.Printing phase adopt PLC touch screen and 360 degree electric ajustment.
7.Pull roller quick lateral moving mechanism, self-locking gap adjustment device.
1.Unique double slotted structure, elimination of Collision between front and back tool, Processing of large size
high carton box,
2.The slot knife thickness is 7-8 millimeter, which is from high quality alloy, tooth profile in sharp cutting, high
wearable.
3.The slot knife with phasing and box height adjustment device, the frequency changer control the dynamic 360
degree adjustment.
4.Precision linear slide way, accurate lateral movement with smooth slotting,
5.Regards the users need it can match the punch device.
6.Pre-creaser, creaser, slotting knife holder, self-locking gap adjustment device.
7.Spring type single slitting knife with glabrous slitting effect and cost saving.
8.Middle knife motorized moving device, fit for each production.
1.Die cut unit roller adopt high quality steel, plated with rigid chrome. High precision dynamic and
static balance increase running stable.
2.Mould roller and rubber roller can auto separate by cylinder eccentric device when the machine do
not die cut, this can lighten machine load and increase rubber roller and die knife life.
3.Matching with feeding system, it with auto up and down device, the rubber roller will down when
feeding paper. The rubber roller will up when stop feeding paper, To make sure every paper die cut
correctly
4.The mechanical transmission rubber roller move 58mm in left and right side, It also with wear and
tear regular could increase the life of rubber roller
5.Die cut phase adopt PLC touch screen, 360 degree adjust electirc number
Machine with rubber amend device, the rubber roller can be used after many times amend
){kind=link}