Chain Printing Slotting Die Cutting Machine

Product Description

The Chain feeding  
The working table adopts the chain push plate feeding mode, manual sheet feeding is suitable for a wide range of paperboard, the general warping paperboard is suitable.
The front and rear axles with a diameter of 40mm are fixed at three points and operate smoothly.
Chain tightness adjusting mechanism.
Overprinter adjustment mechanism to facilitate the rapid adjustment of the plate and board position.



The printing machine (the 3th printing have per-creasing roller)
1. Feed roller and two paper wheels.
2. Down feed roller, embossed hard chrome plated, 16mm wall thickness.
3. Eccentric structure is adopted for the upper and lower roller clearances. The adjustment range is 0-12mm.

4.printing roller
516mm outside diameter (with version of the diameter of 530mm).
Surface grinding, hard chrome plating, balance correction, smooth operation.
Surface spacing 100mm scale line, convenient plate.
Scroll hanging version, unilateral locking, so that hanging version of the accurate, convenient, fast.
Plate hanging ditch, suitable for 10mm plate hanging bar.When loading and unloading the printing plate, the foot switch is electrically controlled to turn forward and backward.

1. Phase adjusting mechanism:

Electric planetary gear grinding,  can achieve version roll circumferential 360 degree adjustment, digital display, intuitive and accurate.
The axial adjustment mechanism can make the plate roller adjust about 20mm.(unilateral 10 mm)

1. The pressure roller:

152mm in diameter and 16mm in wall thickness.
Surface grinding hard chrome, balance correction, smooth operation..
Swing plate structure is adopted for clearance adjustment, with a range of 0-12mm.
 

1. Receive  the paper department:

On the paper roller diameter with a diameter of 112mm, paper wheel diameter with a diameter of 154, embossed hard chrome plating.
16. The lower feed roller 154mm, embossed hard chrome plated, 20# thick wall steel tube precision machining and static balance treatment.
The upper and lower roller clearances adopt the plate structure. The adjustment range is 0-12mm.
 

1. Metal anilox roller:(Changzhou Haili)
2. 200mm in diameter and 25mm in wall thickness.

Steel tube surface after special processing engraving anilox
Dot is consistent, on ink even, wear well.
9.rubber roller :(Jinghui)
218mm in diameter and 20mm in wall thickness.
The steel tube is coated with wear-resisting rubber, with butadiene rubber as the coating layer and a hardness of shore a55-60.
Medium and high special grinding, good ink transfer effect.
Ink circulation using pneumatic diaphragm pump, ink supply stability, simple operation and maintenance.
Ink screen filter impurities, protect the screen roller.


Slotting part with four punching devices (250mm width)
(1)upper cutter shaft, lower cutter shaft, surface grinding hard chrome plating, balance correction, smooth operation..
(2)manual adjustment of line pressing wheel clearance, adjustment data displayed on the dial.
(3)width of slotting cutter 7.0mm.Alloy steel material, after heat treatment grinding tooth slotting knife.
(4)slotting tool seat clearance worm gear box adjustment, dial display, adjustment range 0-12mm.
(5)slotted phase adjustment mechanism, planetary gear structure.
(6)slotted phase adopts phase controller electric digital 360 degree adjustment (operation and stop can be adjusted).
(7)manual synchronous adjustment of box height.
(8)the upper and lower rollers of the pressing line are made of high quality thick-walled seamless steel tube, with the surface of which is finely ground and plated with hard chromium.The roller has a diameter of 200.

transmission gear
Adopt 45# material to grind tooth, the thickness is 50mm, have high wear-resisting, the characteristic of convenient maintenance.

the body is made of ht-150 material, with a thickness of 50mm, good shock absorption performance, and the tension support is made of national standard channel steel, which is solid and stable.The ground rail adopts casting structure, and the unit is powered on and off.

Main features of electrical parts: the use of domestic zhengtai and other famous electrical control components, reliable work, the circuit part of a reasonable design, simple operation, longer service life.