Double Pieces Gluer Machine

• Customization: Available
• Type: Ditch Folder Gluer
• Automatic Grade: Semi-Automatic Folder Gluer
• Model NO.: 2400
• Driven Type: Electric
• Packaging: Film
• One Pieces Max Feeding Paper Size: 1200*1100
• One Pieces Min Feeding Paper Size: 450*320
• Speed: 0-40 Pieces/Min
• Whole Power: 9kw
• Transport Package: Plastic Film Packaging
• Specification: 2400
• Trademark: canghai
• Origin: Hebei
• Production Capacity: 100 Set/Year

Product Description

2400type Double Pieces Gluer Machine

Product :
2000 double Pieces gluer machine can be used AA pieces ,AB pieces,two pieces carton and single Pieces carton to glue, this machine can instead of the manual gluing, reduce the work ,compare with the traditional semi-auto gluer machine ,can save labor,,Because of different working model,compare with above two carton gluing process, can largely improve the product quality

Main technology:
This machine adopt frequency convertor to adjust speed,PLC control,model convert,match with servo motor, run and control exactly.

This machine with separate paper-feeder system,with hard wind absorption feeding pare,can double PC and single PC to feed paper

When this machine work two PC carton, two PC paper can glue in moving, and 4 face positon well and exact.While two PC to one PC,worker can manual fold in folding part,meanwhile  can manual errect to the crossing part of creasing line and corrugated line ,so as to finish the final shaping.  

Machine advantage:
Our machine is different from the double-sided glue box machine on the market. Our machine uses 4 servo motors, 2 servo motors for the paper feeding part, and 2 servo motors for the middle two cardboard stickers. This makes the paper paste more stable.
Some companies use a clutch, so that in the case of unstable temperature, the clutch control is not stable, and the cardboard is not firmly adhered.

Parameter :
 

One pieces Max feeding paper size	1200*1100
One pieces Min feeding paper size	450*320
Applicable paper	A-E corrugate paper and 5-ply paperboard under 6mm
speed	0-40 pieces/min
heat power	1.25kw
whole power	9kw
Servo motor	4 sets

Configuration

component	brand	component	brand
frequency convertor	Delta	proimity swich	Omron
PLC	Delta	photo-electric switch	Omran/Xinling
power switch	Omran	intermediate relay	Schneider
button	Chint	contactor	Schneider
touch screen	Kunluntongtai	air switch	Chint
control voltage changer	Chint	bearing	CGU
cylinder	Tianao	main motor	Shanghai Liwei
air belt	guangzhou Hongyu	press belt	Tianjin Kaixing
transport belt	tianjin kaixing	Serov motor	INVT

Install and operation notice
1, install and connect line
1.1 This machine weight is 2.2T,10cm cement floor is ok , but the floor must level
1.2 When install the machine, the drive part with the workshop wall must more than 1m ,in order to operate and maintenance easily
1.3 this machine input power is 380V AC power,with Zero line and floor line, please connect the line as drawing, MUST INSTALL THE FLOOR LINE
1.4 This machine input air pressure is more than 0.6mpa, then machine can work,check each part running and function is good or not, starting machine way as following : turn on the total power switch on the left of the electric box,then power switch on the button board, click the starting button, running button, fan switch,then machine can run. The paper length input and the single PC and double PC, can input in the touch screen  
1.5 Temperature controller  heat the melting glue ,while normal work,set the temparature, choose the manual model to work.if second day to work, can manual heat,also can choose automatic set to heat in advance
2,operate
2.1 This machine can start after the heating glue melt
2.2 According to  the paper size and thickness ,to adjsut the side blade block of the feeding paper part,the absorption wind belt positon, and the feeding paper knife pressure,to insure the feeding paper contantly and steadily
2.3 Turn on the fan, feed the paper into the middle feeding paper part,then according to the paper size to adjust the feeding paper belt postion,then adjust the back paper rail and side paper rail
2.4 Put the glue into the glue bank, adjust glue by adjusting  the glue control rotate button according to the gluer funstion and paper

3.maintenance

3.1 Each rod linkage mechanism need add lubricate machine oil on time
3.2 Each bearing with base, need to add lubricate grease
3.3 Hoot glue bank part,bearing need to add high temperature grease (bear 250 degreee)
3.4 Wipe the machine on time ,special the front part of adjusting middle feeding-paper ,wipe the drive hexagonal shaft and plain shaft to invoid dust and affect adjusting
3.5 Clean the cold glue bank on time