Lead Edge Feeder Printer Slotter Die Cutter Machine for Corrugated Carton

• Customization: Available
• Printing Page: Single Faced
• Printing Color: 3 Colors
• Model NO.: 1224
• Anilox Roller: Ceramic Anilox Roller
• Dryer: UV& IR
• Type: Ink Jet
• Embossing Structure: Rotary Letterpress
• Structure: Unit Type
• Application: Pre Printed Carton
• Automatic Grade: Automatic
• Printing Speed: 150m/mim
• Warranty: One Year
• Power: 15kw
• Voltage: 380V
• Specification: 1224mm
• Trademark: canghai
• Origin: Hebei
• Production Capacity: 100

Product Description

	Design speed	180pcs/min
	Working speed	100-150pcs/min
	Max feeding size	1200mm×2450mm
	Min feeding size	320mm×750mm
	Max printing area	1200mm×2300mm Note:hanging plate
	Printing plate thickness	7.2mm
	Registration precision	±0.5mm
	Slotter and die cutter precision	±1.5mm
	Max depth of slotting	300mm
	Slotting width	7mm
	Max glue box edge width	50mm
	Cardboard thickness	3-12mm

1.This machine is composed of paper feeding, printing, slotting, die cutting, vibration and stacking, etc. It can complete the printing, slotting, die cutting, stacking and other processes of three and five layers of corrugated cardboard at one time.
2.The thickness of the wallboard is 50mm, and the internal stress of the intermediate frequency quenching and tempering increases the density, hardness, strength, toughness, and conductivity of the wallboard. Artificial aging treatment, large processing center processing in pairs, high strength and high precision.
3.The main transmission system adopts gear transmission, high-precision gear grinding technology, low noise, enhanced gear strength, and improved gear transmission stability. All transmission gears are made of high-quality steel, high-frequency quenched, tempered, and finely ground, with high strength and durability.
4.Bearings adopt famous brand bearings such as Renben, Harbin, Wafangdian, etc., and are inspected one by one, and they are qualified and put into storage.
5.Each unit is electrically clutched and equipped with an alarm bell, and the alarm will continue to ring during the clutch to ensure the safety of the operators. The clutch motor is equipped with a constant torque clutch, which can buffer the collision of each unit in case of incorrect operation.
6.On-line master lock: The main motor is automatically protected when the equipment is not combined, and automatically stops running when the running signal is obtained.
7.The main motor starts with frequency conversion, and the motor adopts frequency conversion motor. Electric appliances adopt domestic famous brand products.


1.The main shaft of the crimping wheel is made of seamless steel pipe. After two grinding processes, the surface is plated with hard chromium and the work is stable.
2.The pressure wheel gap can be quickly adjusted manually, the adjustment range is 3-12mm, and the cross slide is used for connection, and the transmission gear is engaged in the correct position during adjustment.
3.The rubber backing roller is processed and ground with alloy structure seamless steel pipe and plated with hard chrome.
4.Ultra rubber pads use Taiwan's ultra-resistant, which can be used for 6 million times under normal conditions.
5.The stencil roller and the rubber roller are automatically separated by the eccentric device under the condition of no mold, which can reduce the no-load load of the machine and extend the life of the rubber and the die.
6.Mechanical transmission Youli rubber roller moves 40mm left and right, and is equipped with a radial differential device, which can evenly distribute the rubber roller wear and greatly improve the service life of the rubber pad.
7.The machine is equipped with a rubber correction device, which can be used after repeated corrections to the rubber pad.
8.The stencil roller planetary structure phase adjustment, 360-degree rotation, stop, both positive and negative operations, convenient for plate loading and plate operation, and part of the equipment can be controlled by the PLC touch screen.
9.The main frame of the die-cutting part and the main transmission gear are made of heavy rigid materials, which reduces the feedback force generated during the die-cutting part, improves the service life of the equipment, and reduces the transmission and working errors of the equipment.
10.The bottom of the die-cutting part contains a waste discharge system integrated with the slotting part. After being cut by the slotting knife or after die-cutting, the paper cuts that fall are discharged from the waste discharge system and discharged inside the equipment.